TKE Sweden AB
  • Services
    • Control system design
    • Testing
    • Research / Pre-Study
    • Product development
    • Training
  • IoE by TKE
    • Sensing Network
    • IoEX Gateway
    • Human as a Sensor
    • Analytics
  • Products
    • CANtrace
    • Accessories
    • Interfaces
    • Loggers
    • Sensors
    • Software
    • Switches
  • Articles
    • Case Studies
    • News
    • Research and publications
    • New products
  • Company
  • Contact us
  • Menu Menu
  • Shopping Cart Shopping Cart
    0Shopping Cart
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

How to Upgrade Your System with a CAN Switch

Perspectives
Upgrading your system with a CAN switch involves replacing outdated network components with modern alternatives to enhance communication efficiency in Controller Area Networks. This process typically requires assessing compatibility requirements, following proper installation procedures, and configuring the new switch to work with existing systems. A successful CAN switch upgrade can significantly improve data throughput, reduce latency, enhance reliability, and extend the lifespan of your entire network infrastructure while enabling advanced features not supported by older hardware. A CAN switch is a specialized networking device that intelligently directs message traffic between different segments of a Controller Area Network (CAN-bus) system. Unlike […]
03.07.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-07-03 05:00:002025-07-04 15:51:49How to Upgrade Your System with a CAN Switch
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

Can TCS-10 Improve Performance in Harsh Environments?

Perspectives
The TCS-10 CAN switch bridge is specifically designed to improve performance in harsh environments through its robust construction and specialised features. Its wide operating temperature range (-40°C to +85°C), resistance to vibration, and protection against electromagnetic interference make it ideal for demanding industrial applications. The device maintains reliable communication in challenging conditions where standard equipment would fail, ensuring continuous operation of critical systems in manufacturing, transportation, mining, and outdoor installations. The TCS-10 is a specialised CAN switch bridge developed to address the communication challenges faced in industrial environments where standard equipment struggles to perform. At its core, the TCS-10 facilitates […]
01.07.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-07-01 05:00:002025-07-04 15:51:49Can TCS-10 Improve Performance in Harsh Environments?
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

TCS-10 Installation Checklist You Shouldn’t Skip

Perspectives
A comprehensive TCS-10 installation checklist ensures your CAN switch bridge performs reliably within industrial communication networks. Proper installation of this critical component prevents costly downtime, communication errors, and hardware damage while maximizing network efficiency. Following a structured checklist helps technicians verify each step from pre-installation preparation through final system validation, ensuring all technical requirements are met for optimal performance in industrial environments. This guide walks through the essential checklist items you shouldn’t skip when installing the TCS-10. A proper installation checklist for the TCS-10 CAN switch bridge is essential because it prevents system failures, ensures network integrity, and maximizes the […]
30.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-30 05:00:002025-07-04 15:51:50TCS-10 Installation Checklist You Shouldn’t Skip
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

What Experts Say About TCS-10’s Reliability

Perspectives
The TCS-10 has established itself as a highly reliable component in industrial CAN-bus networks according to industry experts. Its proven performance in mission-critical applications stems from robust engineering, comprehensive redundancy features, and exceptional error handling capabilities. Engineers and system integrators consistently highlight the device’s stability in challenging environments and its ability to maintain network integrity even under extreme conditions. For organisations requiring dependable fieldbus solutions, the TCS-10 represents a trustworthy choice backed by extensive technical expertise and real-world performance. In modern industrial settings, CAN-bus networks serve as the critical communication backbone that connects various control systems, sensors, and equipment. The […]
27.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-27 05:00:002025-07-04 15:51:51What Experts Say About TCS-10’s Reliability
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

CAN Switch Setup Mistakes That Could Cost You

Perspectives
Properly setting up a CAN switch is critical for maintaining the reliability and performance of industrial networks. When configured incorrectly, CAN switches can lead to costly downtime, data loss, and even permanent hardware damage. Common setup mistakes include improper termination, incorrect baudrate settings, and inadequate attention to network topology. These errors often manifest as intermittent communication failures that can be difficult to diagnose and resolve without specialised knowledge. Understanding and avoiding these setup pitfalls is essential for protecting your investment in CAN bus technology and ensuring smooth operations across your connected systems. CAN (Controller Area Network) switch technology forms the […]
26.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-26 05:00:002025-07-04 15:51:51CAN Switch Setup Mistakes That Could Cost You
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

How to Maximize Efficiency Using the TCS-10

Perspectives
The TCS-10 CAN switch bridge offers powerful capabilities for optimizing industrial network performance. To maximize efficiency with this device, focus on proper configuration, strategic placement within your network architecture, and regular monitoring of diagnostic data. The TCS-10 excels at managing network traffic, reducing bus load, and enabling segmentation of CAN networks—all critical factors for maintaining stable, high-performance industrial communication systems. With the right implementation approach, the TCS-10 can significantly enhance overall network reliability while simplifying maintenance procedures. The TCS-10 is a specialized CAN switch bridge designed to optimize communication in industrial networking environments. It serves as a critical infrastructure component […]
25.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-25 05:00:002025-07-04 15:51:52How to Maximize Efficiency Using the TCS-10
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

5 Signs Your CAN Switch Might Be Failing

Perspectives
Recognising the early warning signs of a failing CAN switch is crucial for maintaining reliable industrial network operations. A deteriorating CAN switch typically exhibits five key indicators: communication errors, intermittent connection problems, physical abnormalities, network performance degradation, and device recognition failures. Identifying these symptoms early allows for proactive maintenance, preventing costly downtime and communication failures across your industrial network infrastructure. Understanding these warning signs helps maintain the integrity of your CAN-bus systems and ensures continuous data transmission. A reliable CAN switch serves as the backbone of industrial communication networks, ensuring seamless data exchange between controllers, sensors, and other critical components. […]
24.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-24 05:00:002025-07-04 15:51:525 Signs Your CAN Switch Might Be Failing
These racks are installed in the test basins to accommodate all CAN hardware.MARIN

What Makes a CAN Switch Ideal for Smart Systems?

Perspectives
A CAN switch is a specialised networking device that optimises Controller Area Network (CAN) bus communications in smart systems by intelligently routing messages between different network segments. These devices are crucial for modern industrial automation and IoT deployments because they eliminate message collisions, reduce network load, and enable more complex system architectures. Unlike basic CAN hubs, a proper CAN switch provides traffic filtering, improved bandwidth utilisation, and enhanced network reliability—making them ideal for smart systems where deterministic performance and fault tolerance are essential requirements. CAN-bus technology has evolved significantly since its introduction by Bosch in the 1980s, transforming from a […]
23.06.2025
https://tkesweden.se/wp-content/uploads/2020/11/case-study-extension-of-the-marin-can-network-using-the-tcs-10-can-switch-9.jpg 1365 2048 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-23 05:00:002025-07-04 15:51:53What Makes a CAN Switch Ideal for Smart Systems?

What Makes WCS-10 a Smart Choice for Automation?

Perspectives
The WCS-10 is a smart choice for automation because it combines marine-certified reliability with versatile connectivity options specifically designed for industrial environments. This CAN switch bridge enhances system stability while simplifying complex network configurations. Its robust construction ensures consistent performance even in harsh conditions, while its intelligent switching capabilities minimize downtime and optimize data flow across automation systems. For businesses seeking long-term automation solutions that balance performance with operational efficiency, the WCS-10 delivers exceptional value through its certification standards and purpose-built design. In today’s increasingly connected industrial landscape, the WCS-10 serves as a critical backbone for sophisticated automation systems. This […]
20.06.2025
https://tkesweden.se/wp-content/uploads/2023/07/tke-wcs10-1-1030x1030-1.jpg 1030 1030 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-20 05:00:002025-07-04 15:51:54What Makes WCS-10 a Smart Choice for Automation?

What Innovations Are Shaping the Future of Defence Technology

Perspectives
The military sector is experiencing unprecedented technological transformation. Cutting-edge developments in artificial intelligence, autonomous systems, quantum computing, and cybersecurity are revolutionizing defence capabilities worldwide.…
05.06.2025
https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png 0 0 wpseoai https://tkesweden.se/wp-content/uploads/2022/11/tke_sweden.png wpseoai2025-06-05 05:00:002025-07-04 15:51:54What Innovations Are Shaping the Future of Defence Technology
Page 1 of 512345

Categories

  • Case Studies
  • New products
  • News
  • Perspectives
  • Research and publications

Tags

#CiA408 #translifter Analyzer Applications Automation Bauma CAN CAN bus CANFD CANopen CANtrace CAN XL case study CiA Configuration tool Data logger Defence Digitalization FIMA Interface IoE IoT Kvaser Kvaser U100 Leaf Mobile Machines Off Highway Machines Online Store Projects Python Scripting Release Rugged SecD-Day Software Switch System System design TCS-10 tke TK Engineering TKESweden U100 WCS-10 weCAN Wireless

TKE Sweden AB
Slöjdgatan 5
S-903 25 Umeå, Sweden

info@tkesweden.se

© Copyright - TKE Sweden AB Privacy and cookies policy
Scroll to top